Download Serv-U User`s Manual
Transcript
Serv-U File Server User’s Manual Disable SSLv2 Support - There are several different versions of SSL supported by Serv-U. An older version, SSLv2, has documented security weaknesses that make it less secure than SSLv3 and TLS. However, it may be necessary to support SSLv2 for compatibility with exported clients or old client software. Checking this box disables support for the older SSLv2 protocol. FIPS Options Enable FIPS 140-2 mode - FIPS 140-2 is a set of rigorously tested encryption specifications set by the National Institute of Standards and Technology (NIST). Enabling FIPS 140-2 mode limits Serv-U to encryption algorithms certified to be FIPS 140-2 compliant and ensures the highest level of security for encrypted connections. SFTP (Secure File Transfer over SSH2) Using An Existing Private Key Obtain a private key file. Place the private key file in a secured directory in the server. Use the Browse button in ServU to select the file. Enter the password for the private key file. Click the Save button. Creating A Private Key Click the Create Private Key button. Enter the name of the private key, (e.g., "MyDomain Key"), which is also used to name the storage file. Enter the output path of the certificate, (e.g., C:\Program Files\RhinoSoft.com\Serv-U\). Select the Key Type (default of DSA is preferred, but RSA is available). Select the Key Length (default of 1024 bits provides best performance, 2048 bits is a good median, while 4096 bits provides best security). Enter the password to use for securing the private key file. SSH Ciphers and MACs By default, all supported SSH ciphers and MACs (Message Authentication Codes) are enabled for use by the Server. If your specific security needs dictate that only certain ciphers or MACs can be used, you can individually disable unwanted ciphers and MACs by unchecking the appropriate boxes. Serv-U File Server User’s Manual – v11.1.0.5 – Page 63 of 105 Copyright 1995-2012 Rhino Software, Inc. (RhinoSoft.com) – All Rights Reserved