Download Ethernet POWERLINK Controlled Node

Transcript
Overview
62/297
 NMT_CS_STOPPED (Bit mask 0100 1101)
In the NMT_CS_STOPPED state the behavior of the Ethernet POWERLINK Controlled Node is
mainly a passive one. For instance, this state is used for performing a selective shut-down of
the Ethernet POWERLINK Controlled Node while the rest of the networks continues operation.
Reception of SoA frames is still possible when being in NMT_CS_STOPPED state.
The device does not participate at the cyclic data exchange in this state.
The device is not being queried by the Ethernet Powerlink Managing Node with PReq frames.
It also does not respond on reception of PReq frames.
However, it still answers to SoA AsyncInvite commands received from the Ethernet Powerlink
Managing Node. There is no transmission of Ethernet frames possible in this state unless such
an SoA AsyncInvite command is received.
The following reactions to error situations might possibly occur: while being in the
NMT_CS_STOPPED state:
o
Falling back to state NMT_CS_PRE_OPERATIONAL_1 due to some error condition
such as the errors listed in section 4.7.2, table 27 “CN Error Handling” of the EPL
specification.
o
Falling back to state NMT_CS_PRE_OPERATIONAL_2 due to an
EnterPreoperational2 event.
o
Falling back to state NMT_GS_INITIALISING due to a global reset or after reception
of an NMTBootNode command on the network.
o
Falling back to state NMT_GS_RESET_APPLICATION after reception of an
NMTResetNode command on the network.
o
Falling back to state NMT_GS_RESET_COMMUNICATION due to either the
occurrence of an internal communication error or the reception of a
NMTResetCommunication signal.
o
Falling back to state NMT_GS_RESET_CONFIGURATION after reception of an
NMTResetConfiguration command on the network.
When
the
EPL
CN
firmware
gets
into
this
state,
an
“EPLCN_PCK_STATE_CHG_TO_STOPPED_IND/RES – NMT State changed to Stopped”
indication will be issued, see section 6.1.19 of this document.
Ethernet POWERLINK Controlled Node |
DOC071104API12EN | Revision 12 | English | 2013-10 | Released | Public
© Hilscher, 2006-2013