Download SurfaceSPREAD

Transcript
SurfaceSPREAD
SurfaceSPREAD Road Shader
15.10.SurfaceSPREAD Road Shader
The Road Shader generates a procedural road. It provides
detailed parameters for the character and condition of the
asphalt, as well as for road markings, tire abrasion and
surface damage. In most cases, you won’t need to create
cumbersome combinations of numerous Tiles, Noise and
Layer shaders anymore, which are difficult to operate. The
SurfaceSPREAD Road Shader does it all for you and, in most
cases, renders faster than an equivalent self-made shader
combination.
Since the road markings and tiremarks go along the V
direction in UV space, the Road Shader is ideal for being
used on streets that were created using a SweepNURBS.
The Road Shader is divided into several layers, which are
explained in the following:
15.10.1. Asphalt
The Asphalt layer is the basic layer of the road. Many styles
are possible, ranging from concrete to tar.
15.10.1.1.
Asphalt Color
The basic color of the asphalt.
15.10.1.2.
Granularity
Higher values make the asphalt look more coarse.
15.10.1.3.
Blotchiness
This parameter creates a variation in asphalt color and
brightness, increasing the realism.
15.10.1.4.
Darkness
This parameters adds variations in asphalt brightness and
makes for a dirtier look.
15.10.2. Marks
This layer paints road marks on the street. The marks can
also be damaged.
15.10.2.1.
Marks Color
The marks’ color. Normally, this will be yellow or white.
15.10.2.2.
Centermarks Count
The count of centermarks in V direction. A value of “1” creates one continuous stripe. Higher values
will result in a dashed line.
15.10.2.3.
Centermarks Width
The width of the centermark.
15.10.2.4.
Distance
The distance of side marks from each other (or in other words: the width of the road).
15.10.2.5.
Sidemarks Width
The width of the sidemarks.
! !
4673