Download here

Transcript
Installation and Operation
✓ In the unlikely event the LCD screen is unreadable or a
different language is displayed upon power up, adjust
LCD contrast or change language selection. Refer to
Adjusting LCD Contrast or Accessing Language in this
chapter.
10. Select VACUUM and press ENTER, the following
message displays:
. . . VACUUM . . .
30:00
^/v TO ADJUST TIME
Press ^/v buttons to adjust time to desired value.
11. Press NEXT and the following message displays:
OPEN PANEL VALVE
12. Turn the panel valve to LOW and press START, the
following messages display:
PLEASE WAIT.
CHECKING FOR
PRESSURE IN VEHICLE
.....
VACUUM RUNNING . . .
xx:xx
13. Monitor the low side panel gauge until a minimum of
25 inHg of vacuum is reached.
14. Close the following:
— Blue (liquid) recovery tank valve, and
— Blue service hose coupler (CCW).
15. Press EXIT and the following message displays:
CLOSE PANEL VALVE
THEN PRESS NEXT.
16. Turn the panel valve to OFF and press NEXT, the
following message displays for 5 seconds before the
Main Menu screen displays:
PLEASE WAIT . . .
2-4