Download XControl 4L
Transcript
Fundamentals Rear Panel Features 6 5 O N 1 2 3 4 5 6 7 8 7 5 DIP Switch - Eight position DIP switch. Configuration functionality is accessible only from this switch. 6 Terminal Block - Five-screw terminal block for insulated #6 spade lug. Do not terminate bare wires to this block. Wire dress should fan to the inside for box proper clearance. 7 Wire Label - Adhesive label identifies the function of each screw on the terminal block. An additional label is provided on the circuit board adjacent to each screw. NOTE: Rear panel illustration does not accurately reflect component layout. MediaMatrix® - A Division Of Peavey Electronics Corp. Page 17