Download Newsletter

Transcript
I/O Terminal Block [NEW]
difference.
terminal block
Autonics
I/O terminal blocks
& cable
environment by introducing various connector transmission cable series.
The series will guarantee high compatibility with higher controllers (PLC) for
easier wiring works.
Developed with Autonics 35-year accumulated technology - New Autonics
terminal block series. Experience the difference now.
NEW
[Relay terminal block] ABS Series
[Sensor connector terminal block] AFE Series
Major features
Major features
Easy wiring works and significant time saving combined with sensor
connector(compatible with e-CON)
● Unnecessary wire stripping and specific tools
● Space saving mounting with compact size
● Easy check for operation status and for cable break by adopting LED signal
● Two ways of mounting(DIN Rail, bolt fix)
● Selectable NPN/PNP input (NPN/PNP switching Switch)
● Supports CJ Series(Connector transmission cable)
●
Suitable to drive various loads using output signals of PLC
● Easy check for operation status and for cable break by adopting LED signal
● Available 2 types of relay
[TAKAMISAWA(Fujitsu) NYP/MATSUSHITA(Panasonic) PA]
- Support TWO WAY EJECTOR (for relay replacement)
● Two ways of mounting(DIN Rail, bolt fix)
● Supports CJ Series(Connector transmission cable)
●
Ordering information
AB S
H 16 PA
N N
Varistor
installation
Ordering information
Input logic
AF E4
H 20
16 L
F
Case type
LED
Number of sensor
connectors
Number of pins
Connector type
Connector type
Relay type
F
Full Case
L
LED
16
32
16pcs
32pcs
20
40
20pin
40pin
H
Hirose connector
Number of relays
Connector type
Terminal type
Item
E4 Sensor connector 4PIN Socket
Item
Model
Model
AFE4-H20-16LF
AFE4-H40-32LF
Power supply
Rated current
12-24VDC
Max. 1A
(※1)
Number of
sensor connectors
Tightening torque
16pcs
32pcs
Max. 0.8N.m
(※1) LED current of terminal is included in Rated current
No install
C
N
P
TN
PA
04
16
32
S
H
S
Non-COM
NPN (COM+)
PNP (COM-)
TAKAMISAWA(Fujitsu) NYP
MATSUSHITA(Panasonic) PA
04pcs
16pcs
32pcs
Screw
Hirose connector
Screw
AB
Relay terminal block
Major specifications
AF Interface terminal block
Major specifications
N
Rated voltage
Rated load voltage
& current
PA type
Power
consumption TN type
Output type
Number of output
Terminal pitch
Applicable wires
Tightening torque
ABS-S04PA-CN
ABS-S04TN-CN
ABS-H16PA-NN(PN)
ABS-H16TN-NN(PN)
24VDC ±10%
ABS-H32PA-NN(PN)
ABS-H32TN-NN(PN)
250VAC 3A, 30VDC 3A (※1)
(2A/1point, 8A/1 COM)
Max. 10.5mA (※1) / Max. 15.5mA (※3)
Max. 8.5mA (※1) / Max. 13.5mA (※3)
1a contact relay output
32point
16point
(8point/1COM)
7.62mm
Min. 1.25mm²
0.4 ~ 0.6N.m
250VAC 3A, 30VDC 3A (※1)
Max. 10.5mA (※2)
Max. 8.5mA (※2)
4point
(※1): Relay contact capacity for resistive load.
(※2): The power consumption including LED current by one relay.
(※3): The power consumption including LED current of power.
of CJ
Series released
Series
PLC connector
Terminal block connector
Conductor characteristic
Insulation diameter
Cable diameter
Rated voltage
CJ Series
HIF3BA-20D-2.54R, HIF3BA-40D-2.54R, D-SUB 37P, FCN-367J040-AU/F
HIF3BA-20D-2.54R, HIF3BA-40D-2.54R
7/0.127mm(AWG 28)×20P, 7/0.127mm(AWG 28)×10P
0.12mm
Ø7.2mm
Max. 1A
※ Standard specification for cable length is 1m or 2m and cable
length can optional
MITSUBISHI
MELSEC Q, MELSEC AnS, MELSEC A, MELSEC F
LSIS
GLOFA-GM, XGB, XGT
LP-S044, LP-S070, PMC-1HS, PMC-2HS, PMC-2HSN, PMC-2HSP
Autonics
RS Automation
NX700, NX70, N700, N70
Supports
YOKOGAWA
FA-M3
device
FUJI
MICREX-F
KDT
CIMON_CM1
OMRON
C200, C500, CQM1, CJ1, CS1
TELEMECHANIQUE
M340, TWIDO
03 Autonics Newsletter