Download View the Manual - Instrumentation.com
Transcript
Global Energy Innovations – EC1000™ & EC2000™Analyzers Users Manual Chapter 1 – Initial Analyzer Setup The Analyzer Display Screen The Analyzer has a number of various screen types that display menus, results, calculations, etc... Although these screens vary somewhat in their layout, they all share a number of common elements that the user will grow accustomed to during Analyzer operation. Figure 1.9 illustrates these common elements. (1) This icon shows the amount of used and available memory on the SD Card. The user is alerted when memory is near full. (2) The time and data are displayed. (3) The sound level for the audible alarms and notifications. (4) The battery status (state of charge) of the internal lithium-ion battery. (5) The title of the screen. (6) The abridged data section. Often other notices are also displayed in this area. (7) This section is where most of the text messages, data and menu options are displayed. (8) UP and DOWN arrows are shown when there is additional data to see in either scroll direction. The navigation buttons (Figure 1.2) are used to scroll up and down. (9) The four (4) function keys. The text for these keys will change depending on which screen is being displayed. The MAIN MENU The Analyzer MAIN MENU (Figure 1.5) gives the user the following navigation options listed below. In this Chapter, only the QUICK TESTS, TEST CONFIGURATION and UTILITIES MENUS are covered. Some sub Menus in these sections are not covered because they do not directly apply to the basic setup and use of the Analyzer. (1) QUICK TESTS (2) TEST STRING (3) TEST CONFIGURATION (4) TEST RESULTS (5) UTILITIES (6) CONNECT TO PC Page 22