Download TM-V708A
Transcript
AUTOMATIC REPEATER OFFSET 1 Press [MNU] to enter Menu mode. This function automatically selects an offset direction, according to the frequency that you select on the VHF band. The transceiver is programmed for offset direction as shown below. To obtain an up-to-date band plan for repeater offset direction, contact your national Amateur Radio association. c]/ [d d] to select “REPEATER (1–7–)”, then 2 Press [c press [OK]. c]/ [d d] to select “AUTO OFFSET (1–7–2)”, 3 Press [c then press [OK]. This complies with the standard ARRL band plan. 6 144.0 145.5 146.4 147.0 147.6 145.1 146.0 146.6 147.4 148.0 MHz S − S + S − + S − S: Simplex Note: Automatic Repeater Offset does not function when Reverse is ON. However, pressing [REV] after Automatic Repeater Offset has selected an offset (split) status, exchanges the receive and transmit frequencies. c]/ [d d] to switch the function ON (default) or 4 Press [c OFF. 5 Press [OK] to complete the setting. 6 Press [MNU] to exit Menu mode. 29