Download USER`S MANUAL

Transcript
2) Locate two entries on the right hand bottom part of the HPP4000 body. When connecting
power, either pressure-proof packing union or conduit tube can be used. Please choose
most appropriate connection type by considering the operating condition. Insert cable with
terminal port.
3) Locate terminal of current input signal on the left hand bottom side of the HPP4000. Insert
terminal bolts into the cable terminal entries and secure them with (+) and (-) terminals on
the plate. Make sure to tighten terminal bolts with 1,5 fNm (15kgf/cm) torque. Please
check the polarity of the terminals.
IN +
Input Signal (+)
IN -
Input Signal (-)
FG
Ground
OUT +
Feedback Output (+)
OUT -
Feedback Output (-)
Connection – Limit Switch
1) Open the terminal box cover by using 3mm wrench.
18