Download POLARON EX

Transcript
2) Program
There are 4 steps. Set voltage, operating time, delay time and number of cycle for every 4 steps and tap Enter button.
The charge will repeat to tame motor as many as the preset number of cycle. The blue character shows the current
process.
Setting the number of cycle, 1~10 cycles.
Setting the operating voltage, operating time, delay time for each
4 steps.
The operating cycle number.
2) Motor test
When to operate motor, you may check the average current (Aa) and the peak current (Ap) in 6 steps.
Test voltage setup. 4.8V or 7.2V.
It shows the average current and the peak current of 6 steps.
Every step is operated in 5sec on/ 3sec off.
75