Download Manual
Transcript
7.3 Hollow shaft (B) Single-Turn=106, Multi-Turn=116 72 Ø63 35 3,3 20 Ø60 Ø60 68 F7 Ø15 23 20° Ø59 (Ø61)* 1,3 Anlagekante an Momentenstütze Ø3,2 * Edelstahl / Stainless steel 24 Max. W ** = 30 Min. W ** = 15 ** Welleneinstecktiefe (hollow shaft depth) Mounting instructions The clamp ring should only be tightened after Maximum radial and axial misalignment of the the shaft of the driving element was inserted into drive shaft:: the hollow shaft. The diameter of the hollow shaft can be reduced axial radial to 12 mm, 10 mm or 8 mm by using an adapter static ± 0.3 mm ± 0.5 mm (this reducing adapter can be pushed into the dynamic ± 0.1 mm ± 0.2 mm hollow shaft). Version 5/08 Page 21 UME-OCD-EP