Download Proficy HMI/SCADA - iFIX with FIX Desktop Getting Started Guide
Transcript
gs.book Page 5 Monday, April 5, 2004 6:37 PM does not recommend the use of value or economy type computers with iFIX. Instead, GE Fanuc recommends you invest in the higher end (premier) line of computers when purchasing computer hardware. Memory Requirements iClients and SCADA nodes require at least 96MB RAM. This configuration provides enough memory to run iFIX applications. GE Fanuc recommends at least 128MB RAM. NOTE: As more applications run simultaneously on a SCADA server, performance decreases. Whenever possible, run additional applications on different computers. If the size of your process database is over 1MB, add 1 megabyte of memory for each megabyte of database size. For example, if your database is 2MB in size, your SCADA server requires 98MB minimum (96+2=98). If your picture cache size increases, your memory requirements should increase: • 2 to 3 times the file size for each picture that does not include bitmaps and controls. • 3 to 4 times the file size for each picture that includes bitmaps and controls. For example, a 2 megabyte file that does not include bitmaps and controls requires a 4 to 6 megabyte increase in memory. A 2 megabyte file that includes bitmaps and controls requires an increase in the memory of 6 to 8 megabytes. Disk Space Requirements The Intellution iFIX WorkSpace checks to make sure you have at least 10 MB of disk space when you save a picture or a schedule. If there is insufficient disk space, the WorkSpace may react unpredictably and you may lose your work. General Installation Information 5