Download - Digital Precision Systems

Transcript
Table 2.6 Analogue audio outputs connections features
Item
Number of audio channels
Connector labels
Connector type
Audio level output
Impedance
Features
4
AUDIO 1 LEFT
AUDIO 1 RIGHT
AUDIO 2 LEFT
AUDIO 2 RIGHT
XLR-3 male
Line +13dBm máximum
30Ω
2.5 Genlock
The HDR-100 series receivers have a Genlock external reference input in
order to lock composite video and SDI digital outputs to it. The connection
is available on a 75Ω insulated BNC connector located on the rear panel of
the rack-mount demodulator unit.
Table 2.7 Genlock input connection features
Item
Connector label
Connector type
Impedance
Reference signal type
Features
F/LOCK
Insulated BNC female
75Ω
PAL/NTSC
Tri-level
2.6 MD-70 Connection
The Lemo 0B connector placed on the rear panel of the receiver equipment
makes possible to connect the MD-70 meter. The data displayed in this
external meter makes easier to install and point the antennas. This meter
displays exact measurements of signal level, reception frequency and signal
quality
Table 2.8 MD-70 connection features
Item
Designación del conector
Tipo de conector
Features
MD-70
Lemo 0B
2.7 Remote control/Ethernet
The HDR-100 series receivers can be controlled and monitored remotely
over an Ethernet link.
15
HDR-100 Series Digital HD COFDM Receiver
USER’S MANUAL V1.0: