Download - ACTi Corporation

Transcript
Interlacing problem
We strongly recommend you to use the
“Deinterlace-Blending” if your are not sure what to use.
If you are shooting a place where images are all moving
very fast, you confront servious interlancing problem,
then you can try to change it into “Deinterlace Motion”.
NOTE: Deinterlace-blending deliver better images of
static items while deinterlace-motion sacrifice
some resolution to compensate for the motion.
E-4. Serial port baud rate
-This setting is important during the PTZ setting. Please
refer to the table below for how to set it.
Application
How to set Serial baud baud rate:
Video Server +
PTZ camera
This baud rate should be the same
with the PTZ camera’s baud rate
rate setting
IP camera
No use
IP dome camera
No use
IP speed dome
This baud rate should be the same
with the IP speed dome camera’s
39