Download CS 5.50 Manual Temp

Transcript
Preface
About the Central Station Instruction Manual
The Central Station Instruction Manual is a step-by-step guide for new users to setting up and
maintaining your Central Station (CS) software, and performing the daily tasks of receiving,
processing, and resolving alarm signals. This manual is divided into major sections based on the
functions performed by CS operators, supervisors, and managers using the CS system.
Section 1 - Introduction
This section gives a brief overview of how all Monitoring Automation System (MAS) software
works together. You'll also learn about some of the features available in the CS system. This section
should be read by all CS users.
Section 2 - Getting Started
Section 2 details:
•
•
•
•
•
Conventions used by this manual and by MAS software;
Signing on and off of the computer;
Moving through CS;
Entering and editing data;
Commands used for printing reports.
This section should be read by users new to MAS software.
Section 3 - Setting up Your CS System
Section 3 shows you how to set up the most basic information needed in order for your CS software
to work properly. This information includes:
•
•
•
•
Agencies
Installers
Locations
Reporting periods
This section should first be read by the CS supervisors who will decide how information will be
structured in the CS system. Then, the section may be used by data entry staff as a guide to entering
data.
Section 4 - Setting up Subscriber Accounts
This section describes how to set up and edit a basic subscriber account. This information includes:
•
The subscriber's name, address, and telephone numbers;
MAS Central Station, 5.50
Preface