Download "user manual"
Transcript
2 Frame Recording • Frame Recording cannot be set to “On” simultaneously with Interval Recording, Picture Cache Recording or Slow & Quick Motion. When you set Frame Recording to “On,” Interval Recording, Picture Cache Recording and Slow & Quick Motion are forcibly set to “Off.” • No audio recording is executed in Frame Recording. • Frame Recording cannot be made if a setting which includes “HDV” or “DVCAM” is selected with “SDI/HDMI/i.LINK I/O Select” of the VIDEO SET menu. • Frame Recording cannot be performed if “Format” of “System” of the OTHERS menu is set to “SP 1440/23.98P.” Preparatory Settings Before starting Frame Recording, make the necessary settings on the CAMERA SET menu in advance. For details on menu operations, see “Basic Menu Operations” on page 110. 00:00 Select “Frame Rec” of the CAMERA SET menu. CAMERA SET B Shu t t e r B Slow Shut t e r Color Bar Type : Mul t i F l i c ker Reduce B B I n t e r val Rec B Frame Rec B P. Cache Rec 3 Set t i ng : O nf f 1ff Number of Frames : O Select the “Number of Frames” value for one recording session. You can select from among 2, 6, and 12 when the video format (page 44) is set to 720/ 59.94P or 720/50P. With other video formats, you can select from among 1, 3, 6, and 9. 4 Notes 1 The camcorder enters Frame Recording mode. When the special recording mode indication on the screen is active, “Frame Rec” flashes on the screen. Exit the menu. Recording The Frame Recording function is especially effective for clay animation recording. The specified number of frames are recorded intermittently when you press a recording start button. It is recommended to fix the camcorder to a tripod or equivalent and use the IR Remote Commander to start/stop recording rather than pressing a recording start button of the camcorder. Set “Setting” to “On.” Performing Frame Recording When the preparatory settings are completed, you can start recording. 1 Press the REC START/STOP button on the handle or the grip. Recording in Frame Rec mode begins. The “Frame Rec” indication stops flashing. When the number of frames you specified with the menu are recorded, the camcorder automatically enters FRM STBY (Frame Rec Standby) status. 2 Press the REC START/STOP button again. Each time you press the REC START/STOP button, the camcorder records the specified number of frames then enters FRM STBY status. Notes • Recording cannot be stopped until the specified number of frames are recorded. If the power switch is set to OFF during recording, the power is only shut off after the specified number of frames are recorded. • The Rec Review function cannot be used while recording in Frame Rec mode is in progress. • You cannot change the “Number of Frames” setting while recording in Frame Rec mode is in progress. To change it, pause the recording. • The timecode is recorded in Rec Run mode (page 57) during Frame Recording. Frame Recording 67