Download Rexroth Frequency Converter

Transcript
VFC x610 Series
Bosch Rexroth AG
Diagnosis
13.3.3 Error 3 (OC-3): Overcurrent during Deceleration
Possible reason
Solution
Excessively short deceleration time
Excessive load rotation inertia
Motor power and frequency converter
power do not match
Excessive overexcitation braking factor
Wrong motor parameter setting
Increase deceleration time (E0.27)
Use suitable brake components
Motor power has to match with frequency converter power
Reduce [E0.55]
Correct motor parameters setting
13.3.4 Error 4 (OE-1): Overvoltage at Constant Speed
Possible reason
Solution
Surge voltage from power supply
Motor to earth short circuit causes
DC-bus capacitors overcharged
Excessive load rotation inertia
Noise interference
Check input power supply
Check motor connection
Use suitable brake components
Check wiring of control circuit, main circuit and grounding
13.3.5 Error 5 (OE-2): Overvoltage during Acceleration
Possible reason
Solution
Surge voltage from power supply
Check input power supply
Motor to earth short circuit causes
Check motor connection
DC-bus capacitors overcharged
Direct start during motor running
Restart after motor stop or start with speed capture (E0.35)
Increase acceleration time (E0.26) or use S-curve (E0.25,
Excessively short acceleration time
E0.28, E0.29)
DOK-RCON04-VFC-x610***-IT01-EN-P
171/259