Download SwordFish

Transcript
5.9
Query Command
a. Read the camera ID, using command gci.
Command: get_camera_id
Syntax: gci
Prompt: Camera Network ID: 0
b. Read the camera serial number, using command gcs.
Command: get_camera_serial
Syntax: gcs
Prompt: Camera Serial No.: xxxxxxxx
c. Read the firmware version, using command gcv.
Command: get_camera_version
Syntax: gcv
Prompt: Firmware Design Rev.: SF2KFMBxxx
FPGA Design Rev.:
SF2KFFBxxx
d. Display the online help, using command h.
Command: help
Syntax: h
Prompt: Command: ……
Command: ……
6 Troubleshooting
6.1
No Image
Follow the steps in chart 6.1 to diagnose your camera if you see no image at all with camera power and
the LED indicator on.
20
SwordFish User’s Manua