Download Manual HD2030

Transcript
DESCRIPTION OF THE MENU FUNCTIONS
The menu provides all the functions to set the parameters for the instrument functioning.
The menu is entered with Menu key> Settings.
The access to the menu is allowed also with the instrument in measure mode, while for
the modification of a parameter the instrument must be in stop mode, If not, it appears a
message requesting to stop the current measurement: WARNING! Stop the measure to
proceed”.
WARNING!
Stop the measure
to proceed.
YES
NO
Pressing YES the instrument enters the STOP mode and it is possible to proceed with the
modification of selected parameter.
Some of the parameters listed in the menu are changeable directly from the measurement screens: see the chapter “DESCRIPTION OF THE SCREENS” dedicated to the different
modes of visualization.
The menu has a multi-level structure: with main categories and submenus. To select a
menu item use the UP and DOWN arrows: the selected item blinks.
If the parameter placed on the right of a menu item does not blink, it means that the
item can not be modified.
SELECT PARAMETER
Instrument:
HD2030
Serial Num.: 123456789
Version: 108v1.3
Config. RIGHT:
1
Config. LEFT:
2
...
This parameter CAN’T be changed
This parameter is CHANGEABLE
Use the ENTER key to access the selected submenu or to modify the selected parameter.
The selected blinking parameter can be modified with the UP and DOWN arrows: to confirm the new value, press the ENTER key, while to cancel the modifications press the MENU
key.
To exit from a menu and go back to the upper level till returning to the measurement
screen, use the MENU key.
-
50
-