Download OPERATION MANUAL

Transcript
Section 10-49
FORCED SET/RESET CANCEL
Value
Name
0000
Force-reset (OFF)
0001
Force-set (ON)
8000
Forced status released and bit turned OFF (0)
8001
Forced status released and bit turned ON (1)
FFFF
Forced status released
Memory area code (command): The memory area of the bit or flag to be controlled.
Bit/Flag (command): The bit or flag to be controlled.
Memory Areas
The bits (flags) in the following memory areas can be forced set/reset or released (refer to 10-2 Memory Area Designations for memory area designations):
Memory area
Data
CIO, TR, and CPU Bus
Link (see note)
Timer/Counter
Bits status
Memory area
code
00
Completion Flag status
01
Transition
Flag status
03
Note FORCED SET/RESET cannot be used for the Auxiliary Area.
10-49 FORCED SET/RESET CANCEL
Cancels all bits (flags) that have been forced ON or forced OFF.
Command Block
23
02
Command
code
Response Block
23
02
Command
code
Response
code
Note The bits (flags) in the following memory areas can be forced set or forced reset,
and cancelled.
Memory area
196
Data
Memory code
CIO, TR, CPU Bus Link,
and Auxiliary
Timer/Counter
Bits status
00
Completion Flag status
01
Transition
Flag status
03