Download VS4800 - Visiplex
Transcript
Enter the new administrator password that will be required to access the Administration Menu. The default password is PASSWORD. Determines the sensitivity level and timeout interval for automated paging to the Auto Speaker Paging device (usually 898). The Auto Speaker device will be activated when audio is detected on the VOX port and transmission will be terminated when no audio is detected after the timeout interval elapsed. Low Sensitivity requires high audio input and High Sensitivity requires lower audio input. Enter a value between 0 and 9: 0 – Disabled, automated activation is controlled by dry-contact closure (AUX port). 1 – VOX Mode 1 (High sensitivity, 4 seconds timeout) VOX 2 – VOX Mode 2 (Medium sensitivity, 4 seconds timeout) 3 – VOX Mode 3 (Low sensitivity, 4 seconds timeout) 4 – VOX Mode 4 (High sensitivity, 8 seconds timeout) 5 – VOX Mode 5 (Medium sensitivity, 8 seconds timeout) 6 – VOX Mode 6 (Low sensitivity, 8 seconds timeout) 7 – VOX Mode 7 (High sensitivity, 16 seconds timeout) 8 – VOX Mode 8 (Medium sensitivity, 16 seconds timeout) 9 – VOX Mode 9 (Low sensitivity, 16 seconds timeout) Notes: 1. Underlined values indicate default values. 2. Standard paging protocols supported are Visiplex, TAP, COMP1 and COMP2. Password When the cursor is in the VOX field, press the Enter key. Press the F2 key to save your changes or press ESC to cancel the operation. 3.4.3.4 TX Coverage Test Menu From the Setup Menu, select 4. Use this option to send cover page to device 100 every 30 seconds. This feature is useful when testing the transmitter coverage area. The counter will be incremented for each test page that is sent. Press ESC to cancel and return to the Setup Menu. 3.4.3.5 Wireless Setup Menu This screen allows the administrator to configure different wireless settings of the VS4800. From the Setup Menu, select 5. Press F1 to edit the settings. Following are the fields description: PA Default Volume PA Mode PA Timeout Time Sync Mode Determines the default volume used in voice messaging. Enter a value of 1 (lowest), 2, 3 or 4 (highest). Determines if the wireless speaker controllers (such as VNS2200) should be muted when the microphone PTT is off to reduce background audio. Enter P to activate mute when the microphone PTT is off, A to deactivate mute when the microphone PTT is off. Note: This feature requires compatible wireless speaker controller. Determines the time period after which the transmission of voice message will be terminated. Enter a value between 1 and 9: 1 – 30 seconds 2 – 60 seconds 3 – 90 seconds 4 – 120 seconds 5 – 150 seconds 6 – 180 seconds 7 – 210 seconds 8 – 240 seconds 9 – 270 seconds Determines if time synchronization signal should be sent to wireless clocks. Enter Y to activate time synchronization signal, N to deactivate time synchronization signal, S to activate time synchronization controlled by a PC software. 18