Download FEKO Examples Guide

Transcript
INTRODUCTION
1
Introduction
This Examples guide presents a set of simple examples which demonstrate a selection of the
features of the FEKO Suite. The examples have been selected to illustrate the features without
being unnecessarily complex or requiring excessive run times. The input files for the examples
can be found in the examples/ExampleGuide_models directory under the FEKO installation.
No results are provided for these examples and in most cases, the *.pre, *.cfm and/or *.opt
files have to be generated by opening and re-saving the provided project files (*.cfx) before the
computation of the results can be initiated by running the FEKO preprocessor, solver or optimiser.
FEKO can be used in one of three ways. The first and recommended way is to construct the
entire model in the CADFEKO user interface. The second way is to use CADFEKO for the model
geometry creation and the solution set up and only to use scripting for advanced options and
adjustment of the model (for example the selection of advanced preconditioner options). The
last way is to use the scripting for the entire model geometry and solution set up.
In this document the focus is on the recommended approaches (primarily using the CADFEKO
user interface with no scripting).
Examples that employ only scripting are discussed in the Script Examples guide. These examples illustrate similar applications and methods to the examples in the Examples guide and it is
highly recommended that you only consider the Script Examples if scripting-only examples are
specifically required. It is advisable to work through the Getting started guide and familiarise
yourself with the Working with EDITFEKO section in the FEKO Users’ Manual before attempting
the scripting only examples.
Running FEKO LITE
FEKO LITE is a lite version of the FEKO Suite, which is limited with respect to problem size and
therefore cannot run all of the examples in this guide. For more information on FEKO LITE,
please see the Getting started manual and the Installation Guide.
What to expect
The examples have been chosen to demonstrate how FEKO can be used in a selection of applications with a selection of the available methods.
Though information regarding the creation and setup of the example models for simulation is
discussed, these example descriptions are not intended to be complete step-by-step guides that
will allow exact recreation of the models for simulation. This document rather presents a guide
that will help the user discover and understand the concepts involved in various applications and
methods that are available in FEKO, while working with the provided models.
In each example, a short description of the problem is given, the model creation is discussed
(further information may be found in the notes editor window of the model files themselves) and
some results are presented.
July 2011
FEKO Examples Guide