Download Nebulosity - Opticstar

Transcript
Nebulosity User’s Manual
•
•
•
d. Captured data saved in either lossless compressed FITS according to the FITS
standard or uncompressed FITS
e. These same save formats available for any loaded image, making Nebulosity serve
to convert between many FITS formats (just select your output format using the
settings on the Preferences menu).
f. Save current displayed image in BMP format (24-bit color) as displayed
g. Save current image in 16 bit/color (48-bit color) uncompressed TIFF, compressed
TIFF, or PNG (compressed) format
h. Load 8/24 bit PNG, TIFF, JPG, and BMP (scaled to 16/48-bit) or 16/48-bit PNG
and TIFF.
i. Batch convert from FITS to 16/48-bit PNG
j. Batch convert from PNG, TIFF, JPG, and BMP to FITS
Camera support
a. SAC10
b. Orion StarShoot Deep-Space Color Imager
c. SAC7 / “SC” long-exposure modified webcams / Atik 1&2 – all via the
ShoeString LXUSB adapter for all-USB (no parallel port) long-exposure imaging.
d. Simulated camera
Internal calculations
a. All data stored internally in 32-bit floating point per color channel. For B&W or
RAW images, this equates to 32-bits and for color images, this equates to 96-bits
in all math routines. You will never have overflow (saturation) or overflow or
quantization issues as a result.
b. Critical math routines computed in double-precision (64-bit per channel) floating
point.
c. Since all captures even from one-shot color cameras can be done in B&W mode
(RAW CCD data) and since memory for color images is only allocated when
viewing in color, memory requirements can be reduced by capturing one-shot
color data in RAW format for machines with less RAM.
d. All calculations done using pointer arithmetic for high-speed operation.
Image processing
a. Dark / flat / and bias frame pre-processing of B&W, RAW one-shot color, and
RGB one-shot color sets of images.
b. Auto-scaling of dark frames to compensate for differences in exposure time or
temperature.
c. Create and apply Bad Pixel Maps as an alternative way of removing hot pixels.
d. Versatile Power Stretch tool lets you apply not only simple linear stretching of
your images, but non-linear stretches as well. Interactively computes imagepower
giving control of the power, the black-level and the white-level.
e. Digital Development Processing (DDP). A technique to make CCD images look
more like film images by using a hyperbolic scaling of the data. Here, the basic
technique is enhanced to allow easy darkening of the background at the same
time.
f. Star Tightening. A technique to sharpen stars using an edge-detection algorithm
(does not leave the artifacts found in “unsharp mask” techniques).
Version 1.1.3 (1/31/2006)
6