Download EXPERT SERIES 2 BASIC

Transcript
EXPERT SERIES 2 BASIC
4.10 Night Settings
Night functions allow changing the target room
temperature and the minimum ventilation level
when the night comes (refer to the Minimum Ventilation chapter of this manual to set the night fan
speed).
Select:
Main menu
Main menu
Setup
User
Day/Night
Day Night Settings
Night SetPoint?
Night Min.Vent?
Day Time
NightTime
Transition
Yes
Yes
6:00A h:m
6:00P h:m
60 min
Setup*
User
Day/Night
Use
*
•
A password may be required to access this menu (sec. 4.2).
Set the following parameters:
Night Set Point?
Select “Yes” to use a different target temperature at night; select “No” to disable this
function.
Night Minimum Ventilation?
Select “Yes” to change the minimum ventilation fan speed at night; select “No” to disable this function.
Day Time
Set the time at which day settings start being used.
Accessible if a night function is enabled above.
30
to navigate
EXPERT SERIES 2 BASIC rev.09
Night Time
Set the time at which night settings start
being used.
Accessible if a night function is enabled above.
Transition
If the night set point is enabled above, a transition is made from one set point to the other.
Set this transition time to the desired value.