Download Final Design Documentation - Edge
Transcript
5 Exposure The purpose of the exposure station is to expose the photoconductive material to light thereby reducing charge on certain areas of the photosensitive material depending upon the discharge pattern. Due to the properties of the photoconductive material this light then neutralizes the charged area leaving only an electrostatic latent image on the photoconductive surface. Development The purpose of the development system is to deposit charged toner particles onto the charged surface of the photoconductor. The photoconductor transverses the development system at distances that range in the microns to allow for a wall of toner, created by a magnetic field, to attach to the photosensitive material.