Download USER`S MANUAL

Transcript
E1 BER Tester
2.5.4
2
Getting Started
Storage and Shipment Requirements
The instrument may be stored or shipped in environments within the following limits:
Temperature: -20℃ ~ +70℃
Up to 15,200 meters (50,000 feet)
Altitude:
The instrument should also be protected from temperature extremes which could cause
condensation within the instrument.
2.5.5
•
Repackaging Requirements
If the instrument is being returned to the factory for service, please complete a repair
tag and attach it to the instrument.
•
Wrap instrument in heavy paper or plastic. If the instrument is being shipped to the
factory, attach a tag indicating the type of service required, return address, model
number, and full serial number. Mark the container FRAGILE to ensure careful handling.
In any correspondence, refer to the instrument by model number and full serial
number.
•
Use a strong shipping container. A double wall carton made of 250 pound test material
is adequate.
•
Use a layer of shock absorbing material 70 to 100 mm (3 to 4 inch) thick, around all
sides of the instrument to provide firm cushioning and prevent movement inside the
container. Protect the Front Panel controls and Front End connectors with cardboard.
•
Seal shipping container securely.
2.5.6
Maintenance Requirements:
Maintenance appropriate for the operator is:
Cabinet Cleaning:
Clean the cover using a damp cloth only.
Battery Replacement: See Section 2.2.2.
Warning:
No adjustable components and operator serviceable parts inside. Refer service
to qualified personnel to prevent electrical shock.
Do not remove covers.
72-0049-00A
17