Download Installation and Reference Manual
Transcript
Chapter 2 Hardware Installation The Licel Multispectral Lidar Detector consists of the following equipment: 1. power supply unit 2. detector & electronics housing 3. mounting flange (premounted at the detector & electronics housing) 4. DC power cable (Lemo 4 pole) 5. line cable 6. Ethernet cross link cable 7. trigger cable (Lemo CAMAC to BNC coaxial) 2.1 Power Supply Unit The power supply cassette can be integrated to standard 19” form factor systems. The line connector is located at the rear side. The power switch, the control LED, and the DC output connector are on the front side. Figure 2.1: Front (left) and rear sides of the power supply cassette 9