Download MRF24J40MA Data Sheet

Transcript
MRF24J40MA
2.2
FIGURE 2-5:
Printed Circuit Board
The MRF24J40MA module printed circuit board is constructed with FR4 material, four layers and
0.032 inches thick. The layers are shown in Figure 2-2
through Figure 2-6. The stack up of the PCB is shown
in Figure 2-7.
FIGURE 2-2:
TOP SILK SCREEN
Note:
Top view negative Gerber.
FIGURE 2-6:
FIGURE 2-3:
Note:
BOTTOM COPPER
TOP COPPER
Note:
FIGURE 2-4:
LAYER 3 – POWER
PLANE
Top view.
LAYER 2 – GROUND
PLANE
Top view negative Gerber.
DS70329A-page 12
Advance Information
© 2008 Microchip Technology Inc.