Download SECTION 4 HSMLT WINDOWS BASED SET

Transcript
SECTION 4
HSMLT WINDOWS BASED
SET-UP PROGRAM REFERENCE
Number of Cans in FIFO - Avg.: This is the average number of
cans in the FIFO when the machine is running above 800 cpm
FIFO Low Corrections Count: This is the number of FIFO faults
that have occurred when the average number of cans in the FIFO has
dropped below the FIFO Min. A FIFO low fault would be caused by
double clocking a can at the “Reject Photo Eye”. This count is
retained indefinitely but can be reset by clicking the “Calibrate FIFO”
button.
FIFO High Corrections Count: This is the number of FIFO faults
that have occurred when the average number of cans in the FIFO has
exceeded the MIFO Max. A FIFO high fault would be caused by
missing a can at the “Reject Photo Eye”. This count is retained
indefinitely but can be reset by clicking the “Calibrate FIFO” button.
Missed Can Presence Count: This is the number of FIFO faults
that have occurred due to missing a can at the “Can Presence” sensor.
This count is retained indefinitely but can be reset by clicking the
“Calibrate FIFO” button.
HSL-LTA/LTS User’s Manual
SYSTEMS Electronics Group
- 65 -