Download USER MANUAL
Transcript
ENGLISH MAIN MENU AND ACCESS LEVELS Beside the display, there are 6 buttons 3 (3 on the left, 3 on the right) to select the correspondent displayed options. The ESC 2 button (below the display, on the right) allows to quit the displayed menu. 1 4 2 5 3 6 Turn and press the CONTROL SELECTION 4 encoder to select parameters and change their values. The software initial main menu is shown as MAIN in the top left-hand corner of the display. The complete menu path is indicated in the top of the display. In the display bottom: the date (on the left), the time (on the right) and the access level at the centre as follows: ----- L1 (level 1): users not allowed to configure the system L2 (level 2, password required): qualified personnel L3 (level 3, password required): system administrators L4 (level 4, RCF only): system maintenance Enter the password in the SYS LOG > LOGIN menu to login and obtain privileges of either level 2 or 3, in order to be allowed to enter other menus / parameters. Use the SYS LOG > LOGOUT to logout. ACCESS LEVEL 1 – USERS NOT ALLOWED TO CONFIGURE THE SYSTEM -- Level that allows to enter only a software section, in which it is not possible to edit the system configuration, for example (allowed operations): -- Adjust the MASTER volume (BGM or PAGING) -- Use the MP3 player -- Read the system information. -- The password is not required. ACCESS LEVEL 2 – QUALIFIED PERSONNEL (password required) -- Level that allows to (in addition to the level 1 functions): -- See the system logs -- Reset emergency events and faults -- Set messages that can be quickly activated through the 6 display buttons. 21