Download Manual - Induo Net

Transcript
monitor tx
G
Set TX destination
switch(config)#monitor tx
port of monitor
function
show monitor
P
Show port monitor
switch#show monitor
information
monitor
I
[RX|TX|Both]
Configure source port switch(config)#interface
of monitor function
fastEthernet 2
switch(config-if)#monitor RX
show monitor
I
Show port monitor
switch(config)#interface
information
fastEthernet 2
switch(config-if)#show monitor
no monitor
I
Disable source port of switch(config)#interface
monitor function
fastEthernet 2
switch(config-if)#no monitor
802.1x Commands Set
Commands
8021x enable
Level Description
G
Example
Use the 802.1x global switch(config)# 8021x enable
configuration
command to enable
802.1x protocols.
8021x system radiousip
G
[IP address]
Use the 802.1x
switch(config)# 8021x system
system radious IP
radiousip 192.168.1.1
global configuration
command to change
the radious server IP.
8021x system serverport
G
[port ID]
Use the 802.1x
switch(config)# 8021x system
system server port
serverport 1815
global configuration
command to change
the radious server port
8021x system
accountport
G
Use the 802.1x
switch(config)# 8021x system
system account port
accountport 1816
98