Download Manual - FlowVision GmbH

Transcript
Flow Meter | FC01- Ex
TECHNICAL DATA
8.5.2 Transistor outputs (DC switching voltage)
Pin selection:
Signal name
Pin XAH
/ ERROR emitter
1
-
/ ERROR collector
2
+
/ BUSY / PULSE emitter
3
-
/ BUSY / PULSE collector
4
+
Limit Switch 2 emitter
5
-
Limit Switch 2 collector
6
+
Limit Switch 1 emitter
7
-
Limit Switch 1 collector
8
+
Voltage level
Low level - active:
Uce < 0,8 V for IC < 10 mA
Uce < 1 V for IC < 100 mA
High level - passive:
Uce < 48 V
Uce
max. leakage current ≤ 25 µA
Reverse polarity protection:
yes - Imax < 1 A
Short-circuit protection:
yes - Imax < 1 A
max
= 60 V
Resistive load
Max. admissible switching capacity:
1.5 W
Max. admissible switching current:
150 mA
Max. admissible switching voltage:
36 V
Inductive load - L < 100 mH
(DC voltage - without external safety circuit)
Max. admissible switching capacity:
1.5 VA
Max. admissible switching current:
40 mA
Max. admissible switching voltage:
36 V
Capacitive Last - C < 20 µF
Max. admissible switching capacity:
1.5 VA
Max. admissible switching current:
1.5 A
Max. admissible switching voltage:
36 V
Insulation voltage:
signal contact - central electronic unit 500 V
signal contact - signal input 500 V
70
Polarity