Download 4 - Siemens

Transcript
Standard O/I Functions
7.5
STATUS VAR and MOD VAR with the C7 OP
Overview
The C7 offers the possibility to display and to modify address values. This is
possible by means of the configuration of special screens, similar to the PU
functions STATUS VAR and FORCE VAR. Thus, during on-line operation
the control addresses of the C7-CPU can be processed directly at the C7-OP.
STATUS VAR
The addresses can be displayed using STATUS VAR.
FORCE VAR
With FORCE VAR, the addresses can be displayed and their values modified
and transferred back to the C7-CPU. The chosen addresses remain in the
static RAM and are valid after restarting the C7.
Calling up
FORCE VAR
You call the function FORCE VAR via the standard screen ForceVAR. After
calling, the address list is displayed. Depending on the display line length a
one or two line address is presented.
Figure 10-1 shows an example display for the SIMATIC S7.
AS address:
2
DB
10 ADR
DB
ADR
DB
ADR
7
DEC=1234
HEX=
HEX=
*
*
Update in progress
Values
Format
Address only for DB
Address no.
Address type
Figure 7-9
AS Address
Representation of Address for the SIMATIC S7 (Example: C7-624
2x40)
The AS address is the MPI node address of the chosen CPU. This can be
adjusted.
C7–623, C7–624 Control Systems
C79000-G7076-C624-01
7-35