Download English - EFOY Pro

Transcript
Installation
4.3
Connecting the off-heat duct
The off-heat duct supplied enables a controlled discharge of warmed air,
which allows the device to be operated even in confined spaces.
The off-heat of the heat exchanger needs
to be conducted from the installation space
to the outside sideways or downwards in a
10 cm/3.95 in duct.
1
3
2
The supply air side must not be guided by a
duct to ensure that the installation space is
well ventilated.
2
1
3
1.
Supply air,
at least ø 10 cm/3,95 in
2.
3.
Exhaust gas
Exhaust air
1.
Sink the screws for the off-heat
flange into the holes provided at the
air outlet of the EFOY Pro fuel cell.
2.
Attach the off-heat bow to the offheat flange.
Use the off-heat bow to conduct
warm air sideways or downwards. If
you do not need the off-heat bow,
you can connect the off-heat tube directly to the off-heat flange.
Page 23