Download general product information

Transcript
Structure
Frame
The MNS-SG switchgear assembly consists of one
or more enclosed vertical sections. The ends are
designed to allow installation of future sections. Each
vertical section can contain up to four high individually
enclosed Emax power breakers. One or more of
these compartments can be utilized as an auxiliary
compartment for mounting of instrument devices such
as potential transformers, control power transformers,
relays, meters and other control devices.
The switchgear frame members consist of rigid
galvanized steel C-channel rails of 12 and 14 gauge
thickness with holes at 1” (25 mm) intervals. The
frame members are secured with maintenance-free self
tapping screws. Corner joints are made using L-shaped
steel brackets and are also secured with self tapping
screws. Lifting eyes are provided as a standard on the
roof of the enclosure to allow lifting by the use of
a crane.
The section is constructed in a compartmentalized
fashion. Each vertical section consists of three
compartments: the breaker compartment (front), bus
compartment (middle), and cable compartment (rear).
A continuous wire tray is placed on top of the roof
above the breaker compartment. The structure has the
capability of being bolted together to form a
single assembly.
14 MNS-SG Drawout Switchgear | Manual