Download LFGS - HKFEMC

Transcript
SECTION D10
DRIVING MACHINERY
D10.1
INDEPENDENT DRIVING MACHINE
Each escalator/passenger conveyor shall be driven by at least one machine of its
own.
D10.2
REDUCTION GEAR
The driving machine shall incorporate a reduction gear system employing worm
gear, planetary gear or other proven gear types.
(a) Worm gear system
The driving machine shall incorporate a worm reduction gear with a vertical
flange-mounted motor or other proven design. It may be connected by
chain or other proven means to the main drive shaft of the
escalator/passenger conveyor. The worm shaft and worm wheel shall be
housed in a substantial cast iron housing which shall also hold the lubricant.
(b) Planetary gear system
The motor, planetary gears and brakes shall be fully enclosed and form a
unique, compact no-chain unit. Motor and bearings shall have life-time
lubrication.
D10.3
MOTOR
The motor shall be integrally mounted, A.C. squirrel cage, three phase induction
motor of continuous rating, reversible type with high starting torque and low
starting current and specially designed for escalator/passenger conveyor
application. Variable voltage and variable frequency (VVVF) control and soft
starting shall be employed as the motor control and the starting method of the
motor drive respectively.
Other proven motor types may also be used subject to the approval by the
Architect.
Section D10
Page 1 of 2
LF_GS
2012 Edition