Download FORTUNA - SewTrain.com
Transcript
(3) Group C Parameter Specifics Method of Use and Explanation (Pedal acceleration/deceleration curve, slow starting speed, input/output port change related parameter) These are functions not used by general users and should be regulated by an A/S technician. A. Pedal stroke step by step section and speed set up method Item No. Beginning value Name of function C-1 pedal forward first step section 10 C-2 pedal forward second step section 15 C-3 pedal forward third step section 31 C-4 pedal forward fourth step section 40 C-5 pedal forward fifth step section 52 C-6 sewing speed during pedal forward first step 440rpm C-7 sewing speed during pedal forward second step 920rpm C-8 sewing speed during pedal forward third step 4000rpm C-9 sewing speed during pedal forward fourth step 5480rpm C-10 sewing speed during pedal forward fifth step 9960rpm Method of use and explanation After dividing the pedal stroke to 64 steps, the pedal stroke's acceleration/deceleration curve changes according to which stroke step is programmed from pedal forward steps 1 through 5. The pedal stroke's acceleration/deceleration curve changes according to how the pedal forward step by step sewing speed set up is done. B. Slow-start sewing method of use:this function allows to start the sewing slowly and the user can set up the following specific items. Item No. Name of function Method of use and explanation These items help you choose at which point you can apply slow start. If you want to apply it after thread trimming set item No. C-11 value to 1. If you want to apply it after when you start sewing after stopping set item No. C-12 to 1. If both these items are set to 0, the slow starting function will not operate. C-11 Slow Start after thread trimming C-12 Slow Start after sewing machine stops C-13 When Slow Starting, change Slow- starting speed C-14 When Slow Starting, the operation speed of beginning stitch C-15 When Slow Starting, the operation speed of second stitch C-16 When Slow Starting, the operation speed of third stitch C-17 When Slow Starting, the operation speed of fourth stitch C-18 When Slow Starting, the operation speed of fifth stitch When using the slow start function, this item gives you the option of maintaining the same starting speed or setting up a new speed. If you want to set up a new speed, use items No. C-14~C-18 and set up a new speed. When the item No. C-13 set up value is“1”, the slow start beginning values (the specific items that change the set up value) are •1 : 400rpm •2 : 400rpm •3 : 640rpm •4 : 1000rpm •5 : 1680rpm C. Motor maximum speed limit set up method Item No. C-19 Caution Name of function Set up motor maximum speed limit Method of use and explanation This function allows you to limit the maximum motor speed, and the starting value is set to 3000 rpm. If the specific items of the parameter are changed carelessly, they could break down or damage the machine, so the user must be well-trained before using it. 79