Download HW User Manual

Transcript
InfiniBand FDR Switch Platform Hardware User Manual
Figure 16: Inserting the Caged Nuts for the Cable Holder
5
Place to connect the
chassis rail slide
4
Place caged nuts here
3
2
1
Shelf
1. Place the cable holder next to the rack, on the connector side of the chassis, and identify the holes where the caged nuts are to be placed.
The cable holders should go to the outside of the vertical supports.
2. Set the bottom of the cable holder at the level of the shelf.
If the cable holder is not set properly the upper bracket will not line up with the cable
holder.
Mellanox Technologies
34