Download User`s Manual - Tru
Transcript
User's Manual (rev. 2015-03-30) If you already have the network defined in Google Earth, then copy and paste it into an *empty* Tru-Traffic window. Otherwise, use one of the manual methods described below. If you happen to have the Synchro file, importing that may also save you some time, but you'll still need to collect the geodetic coordinates of the intersection (latitude & longitude), which is easiest to get from Google Earth. Both signal coordination and travel time and delay study: If you already have either a Synchro file or a Google Earth file for your network, then it's easiest to start by importing what you've got. If you have both types of files, then open one first and import the other. You have a choice on which one to open first, the Synchro .csv file or the Google Earth KML, and there seem to be two schools on which method is preferred. You might try doing it both ways to see if you develop your own preference. If you don't have either, then use one of the manual methods described below. Short Notes for Creating a New Time-Space / PlatoonProgression Diagram for both Signal Coordination and Travel-time & Delay Study 1. Method A (starting with Tru-Traffic) a) Open the program and select File: New b) Enter the number of intersections along the artery and choose the forward direction. c) Select Arterial/Diagram Window #1 d) Choose the Edit Selected Artery/Diagram Button e) On Artery Tab, give the artery a name. f) You can also enter notes and change the Forward direction. g) Click OK 2. Method B (starting with Google Earth) a) Assemble set of yellow pins, two pins per intersection, in a Google Earth folder. (Recommended: For each yellow pin, set the "name" to the intersection ID number in the format #N, and set the "description" to the names of the crossing streets in the format Street A @ Street B). b) Copy folder from Google Earth and paste into empty Tru-Traffic. c) Play connect the dots to define “routes”, or click the Automatically Trace Routes button. d) Click the Create Arterial Diagrams button. 3. Select Intersection #1, then click Edit button a) On Name, etc. Tab, give the intersection a name and set offset b) On Timing Tab, assign correct phasing and timing values (minimum split, FDW, yellow, etc...) for each phase c) On Green Bands Tab, select desired Action (for TS & TL diagrams only) and Speed. (Design Speed should not exceed posted speed limit) d) OPTIONAL: On Lanes Tab, select correct lane assignments e) OPTIONAL (for PP diagram only): On Volumes Tab, assign Volumes and Saturation Flows f) Click OK 13