Download Tutorial on Synthesis using the Triton Controller

Transcript
What follows is hopefully written in laymans terms.
Each Oscillator has a multitude of individual controls and these can be accessed by clicking on
the ‘More’ button on the T.C.
Octave – You can set the frequency of each oscillator to 4’,8’,16’ and 32’. ie. The Octave.
‘Random’ button produces a random selection of the 2 oscillators, sub oscillator and noise
generator. Not on the Moss board but part of T.C. program - great for quickly creating new
sounds.
Osc. 1 and 2 Parameters
Like PCM Edit mode controls a series of parameters which are common to both oscillators.
The main features most people will need are portamento and Frequency offset. The latter is
useful, as if you detune 1 oscillator from the other you can get a richer sound.
Sub Oscillator
No synth would be complete with a Low frequency or Sub Oscillator. Useful for all types of
modulation and sound generation in its own right if the output frequency is over 40 hertz.
Sub Oscillator Waveform enables a choice between sine, square , triangle and saw.