Download Manual - OMEGA Engineering

Transcript
Absolute Alarm or Threshold Alarm Referring to Setpoint
Command (a.c.aL. selection)
Command Spv
Absolute alarm refers to the
Hysteresis
parameter
command set, with the con > 0
troller in heating functioAlarm Spv
ning (Par.11 act.t. selected
Heat) and hysteresis value
Time
greater than “0” (Par.28
On
Off
Off Alarm output
a.1.Hy. > 0).
The command set can be changed by pressing the arrow keys
on front panel or using serial port RS485 commands.
NB: The example refers to alarm 1; the function can also be
enabled for alarm 2 on model that include it.
Band Alarm (b.aL. selection)
Pv
Alarm Spv
Hysteresis
parameter
 > 0
Alarm Spv
Command Spv
Time
On
On
Off
On
Off
Off
Alarm output
Band alarm hysteresis value
greater than “0” (Par.28
a.1.Hy. > 0).
NB: The example refers to
alarm 1; the function can
also be enabled for alarm 2
on model that include it.
User manual - ATR 142 57