Download User`s Guide

Transcript
The readers model GC-01 are specially programmable by the PC software, and can sync with the PC
software. In this Tool Menu (READER OPTIONS) you will be able to select the general settings of the
reader. NOTE: Please make sure the reader is docked in the base when programming it.
In the above tab called “Settings” you can select the operation of the reader to VIBRATE and/or BEEP
and/or FLASH LED, depending on your application. For a high noise environment, we suggest to activate
the LED and the Vibration Read Feedback. For a nighttime application, we suggest you enable the LED,
and for regular operation we suggest you use the BEEP
The duration of the feedback can be set at either Short (1 Second) or Long (2 Seconds).
Select your desired settings by clicking on the respective boxed and press the “Send” button to confirm
and program the reader. The same applied for the following screen for setting time and date.
In the other settings tab called “Time And Date” you can synchronize the time and date to the reader or
program this as an automatic sync with the time on your PC computer on every uploading of data.
Erase Reader Tools Menu: CLEARING DATA FROM READER
Copyright 2000. Rosslare Enterprises Ltd.
Page 31 of 50
DigiToolTM