Download KYO Unit

Transcript
®
Section 3 - Programming from PC
63
Key/Card Page
The parameters programmed in this page (see Figure 3.16a) will determine access
level of the Digital Keys/Cards. The system can manage 128 Digital Keys/Cards
(SAT and/or PROXI-CARD).
Keys/Cards Table
The User Codes can Arm/Disarm the system and perform various operations, in
accordance with their programmed access levels (refer to the USER MANUAL).
No. - This column shows the Key/Code Number (1 through 25).
Description - This column is for the Key/Card labels of the first 16 Keys/
Cards (maximum 16 letters per label).
Service - This field will allow you to enable the Key/Card to control Service mode (Yes = Key/Card enabled for Service mode).
The Alarm relay will be inhibited during Service mode, and therefore, the
Control panel will not generate Alarms.
Clear Call Queue - This field will allow you to enable the Key/Card to
clear the Call Queue (Yes = Key/Card enabled to clear the Call Queue).
Partitions 1, 2, 3, 4, 5, 6, 7, 8 - This field will allow you to enable the Key/
Card on the Partitions (Yes = Key/Card enabled).
Del. - This field will allow you to delete Keys/Cards (X = Key/Card deleted). Deletion will not be completed until the Program closes then reopens.
Figure 3.16a - Key/Card Page