Download Untitled - Oasys Software
Transcript
Oasys LS-DYNA Environment Release Notes Version 9.4.2 be negative) to avoid an infinite number. The ratio is capped at -100 to avoid large values when E2MAX_2D_PRINC_STRAIN is relatively very small compared to E2MIN_2D_PRINC_STRAIN. If both E2MAX_2D_PRINC_STRAIN and E2MIN_2D_PRINC_STRAIN are negative then the ratio is returned as 1.1 to distinguish it from the case when they are both positive. This is important in fracture prediction where compressive areas are of little interest. • Case 13546 An option has been added to the CL (cloud plotting) button to allow a choice of display methods for element-derived data. The default is raw element values displayed at element centres which is what Cloud plotting in previous versions showed. The new alternative is nodally averaged values shown at node locations. If nodally averaged results are chosen the result is equivalent to a low resolution contour plot, with element centre values not being shown. This tends to hide peak values. (Cloud plotting of nodally derived data is unaffected by this setting as it will always show nodal data at node locations.) • Case 8217 The ability to compute 2D (in-plane) principal stress and strain has been added for shell and thick shell elements. These may also have their directions plotted as part of a Criterion plot. Cut section • Case 11792 Added further explanation to the 'help' texts in the cut-section panel to explain the sign convention of the forces and moments calculated. Data access • Case 14245 In cases where clients keep their data on 'read only' file systems D3PLOT is unable to create modelrelated files in the same directory as the data. One solution proposed by a client with such a system is to defined a 'project current working directory' for a given analysis, or group of analyses, and to store project-related data in that directory. In order to make this simpler to achieve during batch usage an optional command-line option 'pcwd=pathname' has been added which, if defined, will set the default path for the following files to : view files (plot.view) cut-section files (section.cut) group files (groupnnn.asc) settings files (D3PLOTnnn.set) external (blob plot) data files. Page 107 Ove Arup & Partners Ltd 19 October 2010