Download Tegra K1 Embedded Platform Design Guide

Transcript
Tegra K1 Embedded Platform
Design Guide
Description
Same/Diff/NA
Ball Name
Termination
HDMI_TXD[2:0]N/P
Leave NC if HDMI interface not used
HDMI_INT
Leave NC or use as GPIO
HDMI_RSET
Leave NC if HDMI interface not used
AVDD_HDMI, AVDD_HDMI_PLL
Leave NC or connect to GND if HDMI interface not used
SDMMC
SDMMC4_COMP_PU/PD
SDMMC3_COMP_PU/PD
SDMMC2_COMP_PU/PD
SDMMC1_COMP_PU/PD
Leave NC COMP_PU/PD pins for any SDMMC interface not used for
SDMMC functionality.
SDMMC3_CLK_LB_IN/OUT
Leave NC if SDMMC3 not used for SDMMC functionality
JTAG
JTAG_TCK
100KΩ to GND whether JTAG interface used or not.
JTAG_TDI
Leave NC if JTAG interface not used
JTAG_TDO
Leave NC if JTAG interface not used
JTAG_TMS
Leave NC if JTAG interface not used
JTAG_TRST_N
100KΩ to GND whether JTAG interface used or not
JTAG_RTCK
Leave NC if JTAG interface not used
THERM
THERM_DN/DP
Leave NC if external sensor connected to Tegra not used
MISC
VVDD_CPU_PROBE,
VVDD_GPU_PROBE,
VVDD_CORE_SENSE
Leave NC – Not used
HDMI_CEC
Leave NC if not used
OWR
Leave NC – Not supported
Tegra | K1 | DG-07508-001v03 | Copyright © 2014, 2015 NVIDIA Corporation. All rights reserved.
Page 115 of 115