Download ModelSim 6.0 SE Performance Guidelines

Transcript
Improving Performance with OS-specific Options
HP and Sun OS features allow applications to gain significant performance improvements.
ModelSim is implemented to take advantage of these OS features. The sections below discuss
the details.
Memory Addressing Above 2GB on an HP Platform
By default only ~1.5 GB memory is available for processes on 32-bit HP platforms. You must
change the default attributes of an application in order to access addressing space up to the
4GB limit. As system administrator you can do this with the following HPUX change attribute
command:
chatr +q4p enable +q3p enable ./vsim
The 4p command provides addressing into the 3-4GB block, and the 3p provides addressing
into the 2-3GB block. The 4p command is supported by 11.11 and 11.i. Caution should be used
when using the 4th quadrant (+q4p) since HPUX uses this quadrant for shared memory.
Applications like PLI or FLI may be effected when enabling this quadrant.
Enabling Large Pages on Sun/Solaris
Starting with Solaris 9 and ModelSim 5.7, you can improve simulation performance on
Sun/Solaris by enabling large memory pages. For large process size, up to a 2x improvement
have been measured. Note that the kernel_cage_enable may already be set to a one. Follow
these steps to use this Solaris feature with ModelSim 5.7 and newer:
1. Enable a large memory pages by adding the following line to the /etc/system file:
set kernel_cage_enable=1
2. Reboot your machine.
3. Large memory pages should now be available to vsim.
For more information, call us or visit: www.model.com
Copyright © 2004 Mentor Graphics Corporation. This document contains information that is proprietary to Mentor Graphics Corporation and may be duplicated in whole or in part by the original recipient
for internal business purposed only, provided that this entire notice appears in all copies. In accepting this document, the recipient agrees to make every reasonable effort to prevent the unauthorized use of
this information. Mentor Graphics is a registered trademark of Mentor Graphics Corporation. All other trademarks are the property of their respective owners.
Corporate Headquarters
Mentor Graphics Corporation
8005 S.W. Boeckman Road
Wilsonville, Oregon 97070 USA
Phone: 503-685-7000
North American Support Center
Phone: 800-547-4303
Fax: 800-684-1795
Silicon Valley
Mentor Graphics Corporation
1001 Ridder Park Drive
San Jose, California 95131 USA
Phone: 408-436-1500
Fax: 408-436-1501
Europe
Mentor Graphics
Deutschland GmbH
Arnulfstrasse 201
80634 Munich
Germany
Phone: +49.89.57096.0
Fax: +49.89.57096.400
Pacific Rim
Mentor Graphics Taiwan
Room 1603, 16F,
International Trade Building
No. 333, Section 1, Keelung Road
Taipei, Taiwan, ROC
Phone: 886-2-27576020
Fax: 886-2-27576027
Japan
Mentor Graphics Japan Co., Ltd.
Gotenyama Hills
7-35, Kita-Shinagawa 4-chome
Shinagawa-Ku, Tokyo 140
Japan
Phone: 81-3-5488-3030
Fax: 81-3-5488-3031
C&A 7-04
TECH6450-w