Download Single-Phase Static Meter GEM - Elgama

Transcript
6.5. Indication of failures
If a fatal error occurs which leads to the corruption of account data an inscription ‘Er’ appears on
the right side of LCD. When lithium battery voltage falls down to critical limit, a flashing symbol
appears on the right side of LCD. Information on network disturbances, influences by strong
magnetic field and case openings are not shown on LCD though communication interfaces may
determine them.
6.6. Data reading via connection interfaces
Meter consumer may use ELGAMA-ELEKTRONIKA Ltd. software “Gempard” or “Gemdat” for
data reading via optical interface, its processing and graphical image.
Two-wire electric interface is used for remote data reading. Electric communication interfaces
enable data transmission via physical two-wire lines in local network. In order to transmit data in
large distances, GSM, inter-modem or AD interface.
“User’s manual” of each software describes data reading procedure. Table 4 presents the data
viewed via interfaces and its OBIS codes.
20