Download HP Apollo 2000 System User Guide

Transcript
4.
Connect the RCM 2.0 to 1.0 adapter cable to the RCM module.
5.
Reconnect all power:
a. Connect each power cord to the power source.
b. Connect the power cord to the chassis.
6.
Power up the nodes (on page 31).
7.
To install, configure, and access HP APM, see the HP Advanced Power Manager User Guide on the HP
website (http://www.hp.com/go/docs).
Redundant fan option
Fan population guidelines
To provide sufficient airflow to the system if a fan fails, the server supports redundant fans.
Hardware options installation
70