Download DigiNet Center User Manual
Transcript
14. Intelli Upgrader -Using IP address that is registered in connection list of center program, this function can upgrade DigiNet program to a new version that is remotely executing to a Site. Execute Intelli Upgrader program that was basically provided when installing center program from desktop window. 14.1 Execute Intelli Upgrader 1 [Site Information] • It shows connection information for center program’s registered IP address, Site Code, and password etc. You can also choose the site you wish to upgrade for program. ☞ [Tip] Intelli Upgrader program does not support specific change or deletion, and input process on 1 site information. 2 2 [Line Type] 3 • Possible use of line types are LAN, PSTN, ISDN, and its exclusive. When using ISDN or exclusive line, communication can be made using router. 4 • It is possible for ISDN to communicate like PSTN by direct connection (dial type) without using router (Refer to page 16). 5 6 [Intelli Upgrader Execution screen] 3 [Update Package] • This shows program information on selected version of updated package program and original document storage folder, and integration testing result. 4 [Package select] • Select the folder that has original document of update package program. 5 [Start update] • Start the program upgrade of its corresponding site using selected site information and update package program. 6 [Exit] [Site info from Center Program] • End Intelli Upgrader Program. 77