Download AlvariSTAR User Manual
Transcript
Chapter 5 - System Utilities c If none of the conditions above is met, the SET AS MAIN command will be sent. 2 If the AU is not registered, then the result will be Skipped with a failure: “AU.<id> is not connected” Each of these conditions will be checked, during the SW upgrade and for 5 minutes. Step 4: upgrade the NPU 1 If the version already exists as the Main version in the NPU, then the result will be Skipped - “Already running”. 2 If the NPU is currently running from Shadow, the File management policy is applicable: a “If BST is running from Shadow = Set as main”, then a command for SET AS MAIN will be sent. b 3 “If BST is running from Shadow = Skip BS”, then the NPU will be ignored. If none of the conditions above is met, the SET AS MAIN command will be sent. In addition, a SET command for SU default file will be sent. 5.2.9 BreezeMAX Configuration Backup Task The Configuration Backup Task enables to create backup files of the Base Station configuration. The backup file contains copies of all the applicable configuration files and databases in the system. To open the Configuration Backup Task window: 1 In the Task Manager window: Click New, select BreezeMAX Configuration Backup from the list of available task types and click OK. The Configuration Backup Task window is displayed. OR Select an existing Configuration Backup task from the list and click Modify. If the task is Active, the Runtime result screen is displayed, displaying the status of the running task. 154 AlvariSTAR User Manual